Siemens MOBILETT XP Instructions For Use Manual Download Page 39

Page: 39 / 109

Operation

MOBILETT
SPR8-230.621.01.03.02

of 106

Switching on the system

The MOBILETT is operated using a grounded wall outlet or a battery (MOBILETT
XP Hybrid only).

Switching on the MOBILETT XP Hybrid

◆

Turn on the device with the main switch (

– If the mode selection switch is in position Battery Operation or Mains Power

Operation, after about 30 seconds, the green "Ready" lamp lights up. The
generator is now ready for operation.

Activating in Stand-by mode

If the MOBILETT XP Hybrid is not used for 10 minutes, it switches off automati-
cally.

◆

Turn the main switch counterclockwise beyond position (

), until the display

switches on.

Should the green "Ready" lamp not light up, there is a malfunction and the gener-
ator is blocked.

◆

For further information see Messages

(→

Page 57)

Summary of Contents for MOBILETT XP














































































































Search results

Summary of Contents for MOBILETT XP

Reviews:

Related manuals for MOBILETT XP

Brands by name

Popular brands

Siemens MOBILETT XP, Instructions For Use Manual

Search results

Summary of Contents for MOBILETT XP

Reviews:

Related manuals for MOBILETT XP

Brands by name

Popular brands