Siemens MOBILETT XP Instructions For Use Manual Download Page 36

Page: 36 / 109

Operation

Operator Manual

SPR8-230.621.01.03.02

of 106

Operation

◆

Turn the main switch counterclockwise beyond position (

), until the display

switches on. Then let the switch turn back to (

◆

Pre-position the MOBILETT.

◆

Release the arm system and lift up the tube assembly.

◆

Place the cassette at the required position.

◆

Switch on the collimator light.

◆

Check that the light field is parallel with the sides of the cassette, adjust by
turning the MOBILETT and the collimator.

◆

Set the appropriate film focus distance, using the built-in measuring tape.

◆

Place the detachable protractor on the cassette and read the inclination of the
cassette. Adjust the tube assembly.

◆

Collimate the radiation field for the desired image size and select exposure
parameters.

◆

Release the exposure.

Observe radiation safety regulations,

(→

Page 13)

Summary of Contents for MOBILETT XP














































































































Search results

Summary of Contents for MOBILETT XP

Reviews:

Related manuals for MOBILETT XP

Brands by name

Popular brands

Siemens MOBILETT XP, Instructions For Use Manual

Search results

Summary of Contents for MOBILETT XP

Reviews:

Related manuals for MOBILETT XP

Brands by name

Popular brands