manualshive.com logo in svg

Siemens MOBILETT XP, Instructions For Use Manual, Page: 54 / 109

Share
Download
Siemens MOBILETT XP Instructions For Use Manual Download Page 54

Operation

Operator Manual

SPR8-230.621.01.03.02

52 

of 106

 

Driving the unit 

 

If you drive the unit, please observe the following:

❏

The power cable must not be connected to a wall outlet.

Driving with motor power, MOBILETT XP Hybrid only

The driving control has a function designed to prevent the MOBILETT from accel-
erating uncontrollably. This can occur in e.g. slopes or if the MOBILETT is forced 
to go faster. The motor power will be shut-off until the MOBILETT slows down 
again. This is to prevent possible accidents where the operator loses control of 
the MOBILETT.

◆

Check that the power cable is not connected to a wall outlet.

◆

Turn the mode selection switch to position battery operation.
– Main switch (key): On

The maximum incline for the motordrive is 7

°

.

As long as one of the motor operation keys is pressed, the system blocks radia-
tion release. 

Caution

Risk of injuring the operator!

The system drive may shut off suddenly, causing the unit to brake

◆

Be careful if you push the system manually while the motor is on.

Summary of Contents for MOBILETT XP














































































































Reviews:

No comments