Siemens FCT010/DSL Operating Instructions Manual Download Page 93 | Manualshive

Page: 93 / 180

Siemens FCT010/DSL Operating Instructions Manual Download Page 93

9.9

Disposal

Devices described in this manual should be recycled. They may not be dis‐
posed of in the municipal waste disposal services according to the Directive
2012/19/EC on waste electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC, or to a locally ap‐
proved disposal service for eco-friendly recycling. Observe the specific reg‐
ulations valid in your country.
Further information about devices containing batteries can be found at:
Information about battery / product return (WEEE) (

support.industry.siemens.com/cs/document/109479891/

Note
Special disposal required

The device includes components that require special disposal.
• Dispose of the device properly and environmentally through a local waste disposal

contractor.

Service and maintenance

9.9 Disposal

SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB

93

«
...
91
92
93
94
95
...
»

Summary of Contents for FCT010/DSL





















































































































































































Reviews:

No comments