Siemens FCT010/DSL Operating Instructions Manual Download Page 66

Page: 66 / 180

6.3.9

Parameters accessed via drop-down menus

Click on menu "Device" or "View" to open the associated drop-down menus.

Drop-down menus

Table 6-1

Menu "Device"

Option

Description

Download to device

Download all writable parameters to the device.

Upload to PC/PG

Upload all parameters from the device to the parameter
table.

Assign address and TAG

Assign communication address and TAG name.

Value comparison

Compare values between device / project.

Object Properties

Show Properties for device and project.

Calibration log

Create calibration logs for field devices.

Change Log

The change log records which actions have been per‐
formed with SIMATIC PDM on devices.

Wizard - Quick Start

Start guide for quick commissioning of the device.

Wizard - Zero Point Adjustment

Start guide for zero point adjustment (automatic and man‐
ual).

Totalizer

Show or change totalizer settings.

Maintenance

Show maintenance parameters.

Commissioning
6.3 Remote commissioning with PDM FCT010

SITRANS MASS 2100 & FC300 (FCT010/DSL)

Operating Instructions, 06/2020, A5E39788682-AB

Summary of Contents for FCT010/DSL





















































































































































































Search results

Summary of Contents for FCT010/DSL

Reviews:

Siemens FCT010/DSL, Operating Instructions Manual, Page: 66 / 180

Search results

Summary of Contents for FCT010/DSL

Reviews: