manualshive.com logo in svg

Siemens FCT010/DSL, Operating Instructions Manual, Page: 52 / 180

Share
Download
Siemens FCT010/DSL Operating Instructions Manual Download Page 52

5. If the "Use FIFO buffers" check box is deselected, click to select.

6. Set "Receiver Buffer" and "Transmitter Buffer" to Low (1).

7. Click "OK" to close out. Close all screens and then reboot.

Update the Electronic Device Description (EDD)

You can locate the EDD in the SIMATIC PDM Device Library under "Devices" > "Modbus" > 
"Sensors" > "Flow" > "Coriolis" > "Siemens AG" > "SITRANS FC". Check the downloads on our 
website (

www.siemens.com/FC410

) to make sure you have the latest version of SIMATIC PDM, 

the most recent Service Pack (SP) and the most recent hot fix (HF).

Installing a new EDD:

1. Download the EDD from our website (

www.siemens.com/FC410

) and save the zip file to your 

computer.

2. Launch the SIMATIC PDM Device Integration Manager.

3. Browse to the zipped EDD file and select it.

Commissioning
6.3 Remote commissioning with PDM FCT010

SITRANS MASS 2100 & FC300 (FCT010/DSL)

52

Operating Instructions, 06/2020, A5E39788682-AB

Summary of Contents for FCT010/DSL





















































































































































































Reviews:

No comments