manualshive.com logo in svg

Siemens FCT010/DSL, Operating Instructions Manual, Page: 35 / 180

Share
Download
Siemens FCT010/DSL Operating Instructions Manual Download Page 35

4.2.2.5

Installation in a drop line

Installation in a dropline is only possible if a pipeline reduction or orifice with a smaller cross-
section can be installed to prevent the sensor from being partially drained during the 
measurements. 

①

Orifice Pipe

②

Valve

Figure 4-3

Installation in drop line

WARNING

Unsuitable connecting parts

Risk of injury or poisoning. 

In case of improper mounting, hot, toxic, and corrosive process media could be released at the 
connections.
• Ensure that connecting parts (such as flange gaskets and bolts) are suitable for connection 

and process media.

4.2.2.6

Mounting the sensor 

• Install the sensor in well-supported pipelines in order to support the weight of the flowmeter.

• Center the connecting pipelines axially in order to assure a stress-free installation. The 

flowmeter must not be used to bring the rest of the pipework into line; make sure the 
pipework is correctly aligned before inserting the flow sensor.

• Install two supports or hangers symmetrically and stress-free on the pipeline in close 

proximity to the process connections.

Installing/mounting

4.2 Installation instructions

SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB

35

Summary of Contents for FCT010/DSL





















































































































































































Reviews:

No comments