manualshive.com logo in svg

Siemens FCT010/DSL, Operating Instructions Manual, Page: 90 / 180

Share
Download
Siemens FCT010/DSL Operating Instructions Manual Download Page 90

Service information parameters

The basic service information parameters are:

• Driver Current

• Pickup 1 Amplitude

• Pickup 2 Amplitude

• Sensor Frequency

• Process Media Temperature

• Zero Point Adjustment Auto/Manual

• Zero Point Offset Value

• Manual Zero Point

• Zero Point Standard Deviation

9.5

Replacing the device

CAUTION

Corrosive substances

Risk of chemical burns when replacing the sensor.

The sensor in the device contains corrosive substances that result in burns on unprotected skin.
• Make sure that the sensor enclosure is not damaged when replacing the sensor.
• If contact with the corrosive substances occurs, rinse the affected skin immediately with 

large amount of water to dilute substance.

9.6

Spare parts/Accessories

9.6.1

Ordering of spare parts

Ensure that your ordering data is not outdated. The latest ordering data is always available on 
the Internet: Catalog process instrumentation (

http://www.siemens.com/

processinstrumentation/catalogs

)

Service and maintenance
9.6 Spare parts/Accessories

SITRANS MASS 2100 & FC300 (FCT010/DSL)

90

Operating Instructions, 06/2020, A5E39788682-AB

Summary of Contents for FCT010/DSL





















































































































































































Reviews:

No comments