Side TMS 5001, Instruction Manual

Page: 44 / 107

Page 43 of 106
TMS 5001
LOADING SCREEN (PREFORM LOADER) (1/2)
The Load screen in Automatic Mode is basically divided into three zones: on the left-hand side, we have an
indication from the elements that control the preform loader. In the centre, we can configure the times and the
parameters that control the loader. On the right-hand side, we can modify the optional elements of the loader.
On the upper part, there is a bar which indicates the progress of the loading process, together with the state
number and process time in seconds.
Load Control Elements (1/2)
-
Step by Step 4: indicates the state of the SV of the pneumatic cylinder in charge of opening the path
of the downspout so that the preform loading cycle can begin. It also shows the state of the detectors
that identify the end of the process.
-
Step by Step 3: indicates the state of the SV of the pneumatic cylinder in charge of opening the path
of the downspout so that the preform loading cycle can begin. It also shows the state of the detectors
that identify the end of the process.
-
Step by Step 2: indicates the state of the SV of the pneumatic cylinder in charge of allowing a
preform to pass through from the downspout to the loading system. It also shows the state of the
detectors that identify the end of the process.
-
Step by Step 1: indicates the state of the SV of the pneumatic cylinder in charge of opening the path
of the downspout so that the preform loading cycle can begin. It also shows the state of the detectors
that identify the end of the process.
-
Table 1: indicates the state of the SV of the Table 1 pneumatic cylinder in the preform loader’s
positioning system and the detectors that identify the end of the process.
-
Preform Position: indicates the state of the solenoid valve of the preform position detector pneumatic
cylinder.
-
Gripper: indicates the state of the SV of the clip pneumatic cylinder in the preform loader’s
positioning system.