Side TMS 5001, Instruction Manual, Page: 52 / 107

Page 51 of 106
TMS 5001
-
Time Achieve Press. tightness: waiting time, within the press process, for the air tight cylinder to
reach the lower part of its cycle.
-
Press Close/Open Time 1/2: time taken (in seconds) for Press Lines 1 and 2 to open/close. The
movement is defined by the starting and final progress coordinates, and by using the time that this
movement should take. The line control system internally defines the adequate speed and
accelerations to comply with the specified time. Due to the need to synchronise the movements of
Press 1 and 2, the values for Press 2 are the same as the values for Press 1. time taken (in
seconds) for Press Lines 1 and 2 to open/close. The movement is defined by the starting and final
progress coordinates, and by using the time that this movement should take. The line control system
internally defines the adequate speed and accelerations to comply with the specified time. Due to the
need to synchronise the movements of Press 1 and 2, the values for Press 2 are the same as the
values for Press 1.
-
Stretch Rod descent/ascent speed: Maximum speed of the stretch in going up/down (mm/s). The
movement is defined by the starting and final progress coordinates, and by using the speed of the
movement. The line control system internally defines the adequate accelerations in order to reach
the assigned speed.