Side TMS 5001, Instruction Manual, Page: 5 / 107

Page 4 of 106
TMS 5001
SIDE, SA reserves its right to modify the data and technical features of this manual without previous notice,
as part of its continuous improvement programme concerning blowing machines and parts.
SIDE, SA is at the disposal of its customers and it will be willing to listen to any improvement proposals
concerning this manual, provided they serve to enhance the fulfilment of the purposes for which it was written
in the first place or to correct any mistakes in it.
TECHNICAL ASSISTANCE
The SIDE Technical Assistance Service has been conceived to provide its customers with information, spare
parts or on site assistance concerning the Mould blowing machine on demand.
Technical Assistance Service:
Servicio Industrial de Electrónica, SA
C/ Llinars s/n - Polígono Industrial Monguit,
08480 L’AmetlladelVallés
Spain
Phone no. +34 93 846 30 51
Fax no. +34 93 849 22 11
E-mail. Jordi.claramunt@side.es
The document to apply for technical assistance or spare parts should include machine ID data, which appear
on its ID plate.
These data consist of information about the machine model and the FM number (see figure 1).
You should use original SIDE, SA spare parts only
CE MARK
The 5001xl machine has been awarded the CE approval, as stipulated in Council Directive 89/392/CE. The
mark is in the ID plate on the machine (Figure 1).
The original, signed “CE Declaration of Conformity” is handed in together with the Mould blowing machine; the
owner must keep this document and hand it in to the new owner should the machine be sold.