12.5.5
Switching Jobs
The TriSpector1000 is capable of storing up to 32 jobs. These jobs can be selected
through the EtherNet/IP connection by way of a command.
Jobs can be added to the TriSpector1000 through SOPAS using ‘Manage jobs…’.
Once jobs are added to the TriSpector1000, instructions to the programmable con‐
troller can be used to switch jobs in the TriSpector1000.
The command used to switch jobs is ‘set job’. To select the correct job to switch to, the
name of the job can also be used.
In this example there are two jobs in the TriSpector 1000: “Transponder” and “Coin”. To
switch jobs in the TriSpector1000 there will need to be two commands and for each
command there will need to be two UDTs created in the programmable controller.
12
APPENDIX
82
O P E R A T I N G I N S T R U C T I O N S | TriSpector1000
8021808/12ID/2019-01 | SICK
Subject to change without notice
