![background image](http://html.mh-extra.com/html/sick/rfu630-041-series/rfu630-041-series_technical-information_1264276049.webp)
Technical Information
Chapter
4
RFU63x
Electrical installation
8014335/YUO7/2016-04-04
©
SICK AG · Germany · All rights reserved · Subject to change without notice
49
4.7.6
Wiring the digital switching outputs
Physical switching outputs on the RFU630
The two physical switching outputs "Result 1" and "Result 2" of the RFU630 can be allocated
independently of each other with various functions for the output of events in the reading
process. If the allocated event occurs, the corresponding switching output is live after the
end of the reading clock for the selected pulse duration.
Expansion: Additional logical switching outputs in the RFU630 converted to physical "ex-
ternal“ switching outputs in the optional connection module
Thanks to the optional CMC600 parameter cloning module in combination with the
CDB650-204 or CDM420-0006 connection module, the two additional switching outputs
"External output 1" and "External output 2" are available on the terminals in the connection
module.
Important!
These two external switching outputs are not suitable for time critical applications.
The wiring of the switching outputs is done using the connection module, please see:
Important
Capacitive loads on the switching outputs have an effect on the switch-on and switch-off
behavior. The maximum capacity of 100 nF is a limit value.
Connection module Switching output Chapter
CDB650-204
Result 1
Chapter 4.8.11 Wiring the "Result 1" switching output in
the CDB650-204 connection module, Page 60
Result 2
Chapter 4.8.12 Wiring the "Result 2" switching output in
the CDB650-204 connection module, Page 61
External Output 1
(„Ext. Out 1“)
External Output 2
(„Ext. Out 2“)
CDM420-0006
Result 1
Chapter 4.9.11 Wiring the "Result 1" switching output in
the CDM420-0006 connection module, Page 74
Result 2
Chapter 4.9.12 Wiring the "Result 2" switching output in
the CDM420-0006 connection module, Page 75
External Output 1
(„Aux Out 1“)
External Output 2
(„Aux Out 2“)