Chapter
3
Technical Information
RFU63x RFID Write/Read Device (UHF)
26
©
SICK AG · Germany · All rights reserved · Subject to change without notice
8014335/YUO7/2016-04-04
Mounting
Accessories
Internet
Ordering information about the antenna and its accessories (mounting bracket and adapter
cables [N male connector / TNC reverse] of different lengths) is available on the following
SICK product pages on the web:
www.sick.com/6036102
The corresponding power loss values of the cables in the frequency band of 865 MHz to 870
MHz are also listed there.
Mounting
If several antennas are used in a reading station, e.g. two on each side of a conveyor sys-
tem, make sure that the antennas are not directly facing each other, but are installed at
staggered parallel positions.
Wall-mounting (alignment adjustable in two axis):
Use the mounting bracket no. 5322196.
1. For the foot of the bracket, mark and drill four fixing holes on the wall in accordance
with the dimensional drawing in the enclosed mounting instructions.
2. Install the cruciformed mounting plate of the adjusting arm to the antenna
3. Connect the cable to the antenna.
4. Fix the foot of the bracket on the wall using the enclosed bolts.
5. Align the antenna with the help of both hinges to the objects.
a
