SICK OD5000-C15 Series, Operating Instructions Manual

Page: 74 / 94

Access Command Name Parameter Comments
R/W 0x0CE4 Recording trigger
threshold Range
-2,000,000,000 .
..
+2,000,000,000 Unit: nm
R/W 0x0CE8 Recording start
delay Range -50,000 ...
+50,000 If positive, start delay; if
negative, number of prelim‐
inary samples
R/W 0x0CF0 Recording control 0x00: Stop
0x01: Start
R 0x0110 File system free
space Unit: kByte
R 0x0114 File system
capacity Unit: kByte
R/W 0x0074 Client Port (stor‐
age data) 0 ... 65535 The target IP port for the
data push must be set as a
16-bit signed integer.
R/W 0x0070 Client IP (storage
data) Byte array Example: The IP address
192.168.0.200 is the write
parameter 0xC0A800C8
R/W 0x0078 Transmission
interval (storage
data) 0 to 100 Wait time between data
packages in [ms]
R/W 0x0CF8 Storage data
reading 0x00: Stop
0x01: Start
7.4.8 Info
Table 43: Command list for reading information
Cate‐
gory Command Name Parameter Comments
R 0x0004 Firmware version
R 0x0008 Software version
R 0x0120 Temperature Unit: 1/1000 °C
R 0x0124 Device operating
time Unit: s
R 0x0128 Laser operating
time Unit: s
7.4.9 Determining measured values using time specifications
In addition to the measured values, the associated time specifications are also required
for some operations. Using the following command, the device supplies the measured
values together with a time stamp and then outputs this information.
Table 44: Transmitted command
30 06 00 00 01 F0 00 0C
Table 45: Received command
B0 0C Measured value
(4 bytes) Device status/
measurement
result (4 bytes) Time stamp
(4 bytes)
7
OPERATION
74 O P E R A T I N G I N S T R U C T I O N S | OD5000 8021391/17Y6/2020-05-11 | SICK
Subject to change without notice