•
IO-Channels
•
Device
•
Communication
•
Recording
•
Info
The navigation screen on the left-hand side is displayed by default. It can be hidden,
however, by clicking on the button with the three white bars (top left).
The following buttons are displayed on each bar at the top right:
Measured values
: Displays the current measured values. The display of the measured
value (number of decimal places) can be adapted using two buttons.
Help
: Displays help texts on the current settings.
7.3.4
Monitoring
Figure 36: Overview of the Monitoring tab
1
A
-
D
buttons
2
Monitoring
tab
3
Measured values
button
The measured value plotter displays the current measured values (distance/thickness).
Current measured values can be hidden or displayed at any time using the
Measured val‐
ues
button in the bar at the top of the screen. The color corresponds to the respective
channel.
The display of the individual channels can be activated and deactivated using the but‐
tons
A
to
D
.
The digital plotter displays the statuses of the output signals for channels A to D.
The status of the outputs is displayed by LEDs to the left of the buttons:
•
Red = output active
•
Grey = output deactivated
The speed at which the measured values and the digital plotter are output is adjusted
equally by sliding the controller on the speed bar.
7
OPERATION
34
O P E R A T I N G I N S T R U C T I O N S | OD5000
8021391/17Y6/2020-05-11 | SICK
Subject to change without notice
