7.3.10
Device
Figure 58: Overview of the Device tab
1
Device
tab
General device settings can be configured in this view. The following functions are avail‐
able here:
7.3.10.1
Deactivating the measurement laser
Checking or unchecking the box next to
Deactivate measuring laser
activates and deacti‐
vates the laser. If the laser is deactivated then measurement stops as a result. The
laser is activated as standard.
7.3.10.2
Resetting the device to factory settings
Selecting this function resets all device settings to their factory settings. This does not
include network settings (e.g., IP addresses). A subsequent device restart (power reset)
is recommended.
7.3.10.3
Setting the sensor time
This section displays the current time as well as the time at which the device was
started. Clicking on the
Set current time
button adjusts the device time to the time set on
the computer being used.
7.3.10.4
Device identification (find me)
When this function is selected, the status LED of the device in question flashes for 5 s.
7.3.10.5
Saving the configuration
When this function is selected, the entire device configuration is saved in a file and pre‐
pared for download. A save location must be selected for the file.
NOTE
The default save location is normally the download folder (this depends on the individ‐
ual browser settings).
OPERATION
7
8021391/17Y6/2020-05-11 | SICK
O P E R A T I N G I N S T R U C T I O N S | OD5000
55
Subject to change without notice
