Real distance
Measured value without averaging
Output signal
1
Time t
6
2
Measured value with median
3
5
Measured value with averaging
4
5
4
3
2
Figure 43: Median and average filter
1
Output signal
2
True distance
3
Measured value with median
4
Measured value with averaging
5
Measured value without averaging
6
Time
7.3.6.2
Setting the Hold function
The Hold function extracts a specific value such as the maximum or minimum value
within a detection period. The value which was set under
Hold Set
is used as the holding
period.
•
Use this function after entering Hold Reset if Auto Peak or Auto Bottom is used.
Off
When the hold function is deactivated, the measurement result is output in an unedited
format and the Hold Input is ignored.
OPERATION
7
8021391/17Y6/2020-05-11 | SICK
O P E R A T I N G I N S T R U C T I O N S | OD5000
41
Subject to change without notice
