27
8011952/YWL2/3-0/2016-08| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER C200
Subject to change without notice
PRODUCT DESCRIPTION
2
2.2.4.4
Modules
1
Display module
Module to display measured values and status information and for configuration during
start-up, selection via operating buttons.
a) Displays
The graphic display shows two main measured values of a connected sender/receiver unit
selected at the factory or calculated values from the MCU (e.g., scaled dust concentration)
as bar charts. Alternatively, up to 8 single measured values of a sender/receiver unit can
be displayed (toggle with “Meas” button).
Fig. 14: LC-Display with graphic (left) and text (right) display)
b) Control buttons
Type
Display
LED
Power (green)
Voltage supply OK
Failure (red)
Function fault
Maintenance request (yellow)
Maintenance request
LC-Display
Graphic display (main screen)
●
Dust concentration
●
Transmission
●
Opacity
●
Extinction
●
Scattered light intensity
Text display
Two measured values (see graphic display) and
8 diagnosis values (
)
Button
Function
Meas
●
Toggle between text and graphic display
●
Display the contrast setting (after 2.5 s)
Arrows
Select next/previous measured value page
Diag
Display alarm or fault message
Menu
Display of main menu and selection of submenus
