![background image](http://html.mh-extra.com/html/sick/1026820/1026820_operating-instructions-manual_1264608130.webp)
Table 37: Supplements for multiple sampling
Multiple sampling
Supplement
Basic response time and supple‐
ment
2 times (default)
0 ms
80 ms
3 times
40 ms
120 ms
4 times
80 ms
160 ms
5 times
120 ms
200 ms
6 times
160 ms
240 ms
7 times
200 ms
280 ms
8 times
240 ms
320 ms
9 times
280 ms
360 ms
10 times
320 ms
400 ms
11 times
360 ms
440 ms
12 times
400 ms
480 ms
13 times
440 ms
520 ms
14 times
480 ms
560 ms
15 times
520 ms
600 ms
16 times
560 ms
640 ms
External OSSDs
If the OSSDs on another device are used via EFI interface as external output signal
switching devices (for example with two safety laser scanners connected together), the
response time increases by 20 ms in each case.
Further topics
•
"Basic response time", page 79
12.4
Timing behavior of the OSSDs
The safety laser scanner tests the OSSDs immediately after switch on and then at regu‐
lar intervals. For this purpose the device briefly switches off both OSSDs (for 300 µs)
and checks whether the OSSDs switch to the OFF state during this time.
NOTE
The controller must not respond to this test pulse. It must not shut down the machine
due to the test pulse.
12
TECHNICAL DATA
130
O P E R A T I N G I N S T R U C T I O N S | S300
8010948/ZA21/2020-06-18 | SICK
Subject to change without notice