SICE S 63 E, Instruction Manual

Page: 115 / 356

Operator's Manual
S 63 E - S 63 E C
115
By pressing the key the optimisation procedure can be continued.
- At the end of the first spin the instruction that the tyre is to be mounted on the rim in
the reverse direction may appear. If you do not intend to reverse the tyre or if doing so
is impossible, press the key and the machine will provide the instructions for
completing the programme without reversing the tyre.
13. ENABLING THE OTHER OPERATOR
This programme makes it possible for two different operators to use the machine at the
same time due to the presence of two different working environments.
The parameters which remain saved for every working environment are:
- balancing mode (Dynamic, Alu x, Motorcycle etc.);
- wheel dimensions (distance, diameter and width of those relating to the active ALU
programme).
The machine's general settings remain the same for all working environments:
- grams/ounces, sensitivity x1/x5, threshold, etc....
Proceed as follows to recall this programme:
• press the key
- use the keys to search for OPE 1 (or OPE 2 if previously set)
• press the key to change the setting:
or 1 first operator
or 2 second operator
- press the key to confirm and exit
Activation of the second operator is indicated by the illumination of the LED on
the display panel.
Repeat the procedure described above to return to the first operator.