SICE S 63 E, Instruction Manual

Page: 80 / 356

80
S 63 E - S 63 E C
Operator's Manual
spaces surrounding it are at least equal to the ones indicated in fig.7.
7
Fixing the machine to the ground (Fig. 7/7a)
The machine is to be fixed to the ground if it does have the triangular foot but is going
to be used with wheels heavier than 50Kg. In such a case the triangular foot will have to
be removed in order to fix the front bracket.
- Undo the three hex head screws M8x60 fixing the machine to the pallet; remove the
plastic washers from between the body and the three L shaped brackets: these brackets
are used to fix the machine to the ground;
- put the brackets back on the machine in the
original position, without locking the screws;
- Position the machine on the ground in the
selected position and make sure that the
surrounding spaces are at least those indicated
in Fig. 7;
- Make a mark on the floor where to drill;
- drill where the marks are and then take the
Fischer M8 anchors supplied and insert them in
the holes just made;
- Anchor the machine to the ground, fixing the
L shaped brackets to the Fischers using the
relative screws and washers (fig.7a);
- Lock the three securing screws to the body.
7a