-22-
O
PE
R
AT
IO
N
S
Model W1807 7
1
⁄
2
HP Heavy-Duty Industrial Tilting Spindle Shaper
OPERATIONS
General
This shaper will perform many types of operations that
are beyond the scope of this manual. Many of these
operations can be dangerous or deadly if performed incor-
rectly.
The instructions in this section are written with the
understanding that the operator has the necessary knowl-
edge and skills to operate this machine.
If at any time
you are experiencing difficulties performing any opera-
tion, stop using the shaper!
If you are an inexperienced operator, we strongly recom-
mend that you read books, trade articles, or seek training
from an experienced shaper operator before performing
any unfamiliar operations.
Above all, your safety should
come first!
Always wear safety glasses when oper-
ating this machine. Failure to comply
may result in serious personal injury.
READ and understand this entire instruc-
tion manual before using this machine.
Serious personal injury may occur if
safety and operational information is not
understood and followed. DO NOT risk
your safety by not reading!
DO NOT investigate problems or adjust
the machine while it is running. Wait
until the machine is turned
OFF
, dis-
connect from power, and all work-
ing parts have come to a complete
stop before proceeding!
Summary of Contents for W1807
