-20-
SE
TU
P
Model W1807 7
1
⁄
2
HP Heavy-Duty Industrial Tilting Spindle Shaper
7.
Connect the machine to the power source.
8.
Push the emergency OFF button in, then twist it
clockwise so it pops out. When the OFF button pops
out, the switch is reset and ready for operation (see
Figure 13
).
9.
Turn the forward/reverse switch to
Fwd
.
10.
Push the ON button to verify the machine operates
correctly.
—
When operating correctly, the machine runs
smoothly with little or no vibration or rubbing
noises.
— Investigate and correct strange or unusual noises
or vibrations before operating the machine fur-
ther. Always disconnect the machine from power
when investigating or correcting potential prob-
lems.
11.
Press the emergency OFF button to stop the
machine.
12.
WITHOUT resetting the switch, press the ON button.
The machine should not start.
— If the machine does not start, the OFF button
safety feature is working correctly. Continue to
Verifying Spindle Rotation
on the next page.
— If the machine does start (with the OFF button
pushed in), immediately disconnect power to the
machine. The OFF button safety feature is not
working correctly. This safety feature must work
properly before proceeding with regular opera-
tions. Call Tech Support for help.
�����
������������������������������
������������������
Figure 13.
Resetting the emergency
OFF
switch.
Summary of Contents for W1807
