92
8.2.5 Outputting the Status
If the open-link recorder has a data error on its link, it will save the error as a communication
error in the internal status area. The (ESC S) command reads this status. Issuing the command
clears an on-going error.
1) Status Output Command
ESC S(CR) (LF)
Upon receiving this command, outputs will be the status of commands received so far.
2) Status Output
XX:
00 to 19
Table 8.2.5 Status output list
Status factor
Status factor
Status output
A/D END
Syntax error
Chart paper-empty
ER 00 C
R
L
F
ER 01 C
R
L
F
O
ER 02 C
R
L
F
O
ER 03 C
R
L
F
O
O
ER 04 C
R
L
F
ER 05 C
R
L
F
O
ER 16 C
R
L
F
O
ER 17 C
R
L
F
O
O
ER 18 C
R
L
F
O
O
ER 19 C
R
L
F
O
O
O
O: Factor by which the status is ENABLED.
A/D END:
This occurs when AD conversion is completed.
Syntax error:
This occurs during a communication error or a command error.
Chart paper-empty: This occurs when chart paper-empty is detected.
(When chart paper-empty option has been ordered.)
E
R
X
X CR LF
