46
(2)
(Current/Voltage),
(Thermocouple),
(Resistance Temperature Detector)
[Note]
: When changing a decimal point position, change it during (3) Scaling (pp. 48, 49).
Measures Current, Voltage, Thermocouple and RTD.
Example: When setting Thermocouple T for Channel 1 (T: -100 to 300 )
Press the “MENU” key for 3 seconds or longer to enter
setup mode. "
" is displayed, then press the
“ENT” key.
Use the
key to select the desired channel. Press the
“ENT” key.
Use the
key to select the mode. Press the “ENT”
key.
Use the
key to select a type. Press the “ENT” key.
Use the
key to select a sign and numeral.
Use the
key to shift a digit. Press the “ENT” key.
Use the
key to select a sign and numeral.
Use the
key to shift a digit. Press the “ENT” key.
Press the “ENT” key. Setting is completed.
To return to user mode, press the “MENU” key for 3
seconds or longer.
Display
Operation keys
Description
MENU
ESC
3 sec
ENT
ENT
ENT
ENT
FEED
ENT
FEED
ENT
ENT
(Span setting)
(Zero setting)
[Note]
• When an incorrect numeral is entered,
or
is displayed.
Press the “ENT” key and re-enter the correct numeral
.
• Perform range settings that do not need the scaling at this step (2)
,
,
.
(Be especially sure to perform the thermocouple and RTD range settings for which decimal
point position change is not necessary.) (One digit after the decimal point is standard.)
Do not perform scaling here.
