Shinko HR-706, Instruction Manual

Page: 51 / 120

50
(4) (Square Root)
Caluclates the square root of Volt input, and scales the value.
The unit can be set. (See 7.1.3 on page 58.)
Example: Setting the voltage of 0 to 40 mV and scale of 000.00 to 100.00 for Channel 1.
Press the “MENU” key for 3 seconds or longer to enter
setup mode. " " is displayed, then press the
“ENT” key.
Use the key to select the desired channel. Press
the “ENT” key.
Use the key to select " ". Press the “ENT”
key.
Use the key to select a range (50mV). Press the
“ENT” key.
Use the key to select a numeral. Use the key
to shift a digit. Press the “ENT” key.
Use the key to select a numeral. Use the key
to shift a digit. Press the “ENT” key.
Use the key to select a numeral. Use the key
to shift a digit.
Press the key again at the lowest digit (at right) to
flash a decimal point. Use the key to select a
decimal point position. Press the “ENT” key.
Use the key to select a numeral. Use the
key to shift a digit. Press the “ENT” key.
Press the “ENT” key. Setting is completed.
To return to user mode, press the “MENU” key for 3
seconds or longer.
FEED
PRINT
MENU
ESC
3 sec
ENT
PRINT
ENT
PRINT
ENT
PRINT
ENT
FEED
PRINT
ENT
FEED PRINT
ENT
FEED
PRINT
ENT
PRINT
ENT
ENT
FEED
(Span input value)
(Zero input value)
(Zero-side scale value)
(Decimal point)
(Span-side scale value)
Display Operation keys Description
[Note]
If an incorrect numeral is entered, ,
or is displayed.
Press the “ENT” key and re-enter a correct numeral.