36
Selected
value
Event output
function
Proceeding to the lower level
with the
key
Remarks
007
Alarm output;
Process high alarm
Same as the High limit alarm
008
Alarm output;
Process low alarm
Same as the High limit alarm
009
Alarm output;
High limit with standby
Same as the High limit alarm
010
Alarm output;
Low limit with standby
Same as the High limit alarm
011
Alarm output;
High/Low limits with
standby
Same as the High limit alarm
012
Alarm output;
High/Low limits with
standby independent
Same as the High limit alarm
013
Timer output
linked with
“Timer Start/Stop” in
[Event input allocation].
Timer output delay action
Timer output time unit
OFF delay time
ON delay time
Select “Timer
Start/Stop” in
[Event input
allocation].
(pp.33, 34)
014
Timer output
linked with
“Timer Start/Stop” in
[Event input allocation].
Control ON during
timer operation.
Control OFF after time
is up.
Same as the above
Same as the
above
015
No event
016
Loop break alarm
output
Loop break alarm time
Loop break alarm band
017
Time signal output
Time signal output step
Time signal OFF time
Time signal ON time
Time signal
output is turned
off when the
performing step
is complete.
018
Output during AT
Outputs during AT
019
Pattern end output
Program control
•
If an alarm type is changed, the alarm set value defaults to 0 (0.0).
• If “001 to 012 (Alarm output)” is selected : Individual setting for the event output
If “013 to 019” is selected: Common setting to the plural event outputs