Shinko ACD-15A-R/M Instruction Manual Download

Page: 52 / 112

Character

Name, Function, Setting Range

Factory Default

EVT4 alarm value

• Sets EVT4 alarm value.

Setting the value to 0 or 0.0 disables the function (except

Process high and Process low alarm)

Not available if No event is selected.

Available only when Alarm output is selected in [Event output EVT4

allocation].

• Setting range: Refer to (Table 8.1.2-1) on p.53.

EVT4 high limit alarm value

• Sets EVT4 high limit alarm value.

Setting the value to 0 or 0.0 disables the function (except

Process high and Process low alarm)

Not available if No event is selected.

Available only when Alarm output is selected in [Event output EVT4

allocation].

For the independent alarms such as High/Low limits independent,

High/Low limit range independent and High/Low limits with standby

independent, the EVT alarm value matches the low limit side, and

EVT high limit alarm value matches the high limit side.

• Setting range: Refer to (Table 8.1.2-1) on p.53.

EVT5 alarm value

• Sets EVT5 alarm value.

Setting the value to 0 or 0.0 disables the function (except

Process high and Process low alarm)

Not available if No event is selected.

Available only when Alarm output is selected in [Event output EVT5

allocation].

• Setting range: Refer to (Table 8.1.2-1) on p.53.

EVT5 high limit alarm value

• Sets EVT5 high limit alarm value.

Setting the value to 0 or 0.0 disables the function (except

Process high and Process low alarm)

Not available if No event is selected.

Available only when Alarm output is selected in [Event output EVT5

allocation].

For the independent alarms such as High/Low limits independent,

High/Low limit range independent and High/Low limits with standby

independent, the EVT alarm value matches the low limit side, and

EVT high limit alarm value matches the high limit side.

• Setting range: Refer to (Table 8.1.2-1) on p.53.

Summary of Contents for ACD-15A-R/M

















































































































Search results

Summary of Contents for ACD-15A-R/M

Reviews:

Related manuals for ACD-15A-R/M

Brands by name

Popular brands

Shinko ACD-15A-R/M, Instruction Manual

Search results

Summary of Contents for ACD-15A-R/M

Reviews:

Related manuals for ACD-15A-R/M

Brands by name

Popular brands