Shinko ACD-15A-R/M Instruction Manual Download

Page: 46 / 112

Character

Name, Function, Setting Range

Factory Default

SV fall rate

0 /minute

• Sets SV fall rate (falling value for 1 minute). (Refer to “SV rise rate”.)

Setting to 0 or 0.0 disables the function.

• Setting range: 0 to10000 /minute ( /minute)

Thermocouple, RTD inputs with a decimal point:

0.0 to1000.0 /min( /min)

DC voltage, current inputs: 0 to 10000/minute (The placement of the

decimal point follows the selection.)

Indication when output OFF

OFF indication

• Selects the indication when control output is OFF.

•

:OFF indication

: No indication

: PV indication

: PV indi Any event output (EVT1, EVT4, EVT5)

Backlight selection

All are backlit

• Selects the display to backlight.
•

: All (Displays and indicators) are backlit.

: PV Display is backlit.
: SV/MV/TIME + MV/DV/Valve Bar Graph Displays are backlit.
: Action indicators are backlit.
: PV + SV/MV/TIME + MV/DV/Valve Bar Graph Displays are backlit.
: PV D Action indicators are backlit.

: SV/MV/TIME + MV/DV/Valve Bar Graph Di Action

indicators are backlit.

PV color

Red

• Selects PV Display color. See “PV Display color selection” on p.49.

•

: Green

: Red

: Orange

: When any alarm output (EVT1, EVT4, EVT5) is ON,

PV color turns from green to red.

: When any alarm output (EVT1, EVT4, EVT5) is ON,

PV color turns from orange to red.

: PV color changes continuously (Orange Green Red).

: PV color changes continuously (Orange Green Red),

and simultaneously when any alarm output (EVT1, EVT4,

EVT5) is ON (Red).

PV color range

5.0

• When

(PV color changes continuously) or

[PV

color changes contin Any alarm output (EVT1, EVT4, EVT5)

occurs] is selected in [PV color], the value of green PV color range

can be set. See “PV Display color selection” on p.49.

• Setting range: 0.1 to 200.0 ( ),

DC voltage, current inputs: 1 to 2000 (The placement of the decimal

point follows the selection.)

Summary of Contents for ACD-15A-R/M

















































































































Search results

Summary of Contents for ACD-15A-R/M

Reviews:

Related manuals for ACD-15A-R/M

Brands by name

Popular brands

Shinko ACD-15A-R/M, Instruction Manual

Search results

Summary of Contents for ACD-15A-R/M

Reviews:

Related manuals for ACD-15A-R/M

Brands by name

Popular brands