Sharp MX-2314N, Operation Manual

Page: 708 / 836

7-40
SYSTEM SETTINGS
Contents
*1 When the Internet fax expansion kit is installed. (On the MX-2314N, the productivity kit is required.)
*2 When the facsimile expansion kit is installed.
*3 When network connection is enabled.
*4 This function is not available in some countries and regions.
‹
Speaker Volume Setting –
7-87 • Receive Signal Middle
• Communication Error Signal Middle
‹
Original Print on Transaction Report Print Out Error Report Only 7-87
‹
Transaction Report Print Select Setting
7-87
• Single Sending Print Out Error Report Only
• Broadcasting Print Out All Report
• Receiving No Printed Report
‹
Activity Report Print Select Setting
7-88 • Auto Print at Memory Full Disabled
• Print Daily at Designated Time Disabled
‹
Body Text Print Select Setting Disabled 7-88
‹
Pre-Setting Mail Signature Disabled 7-88
X
I-Fax Send Settings 7-88
‹
I-Fax Reception Report On/Off Setting Disabled 7-88
‹
I-Fax Reception Report Request Timeout Setting 1 hour 7-88
‹
Number of Resend Times at Reception Error 2 7-88
‹
Maximum Size of E-mail Attachments Unlimited 7-88
‹
Rotation Sending Setting All Enabled 7-89
‹
Printing Page Number at Receiver Enabled 7-89
‹
Recall in Case of Line Busy Times: 2, Interval 3 min. 7-89
‹
Recall in Case of Communication Error Times: 2, Interval 3 min. 7-89
X
I-Fax Receive Settings 7-89
‹
Auto Receive Reduce Setting Enabled 7-89
‹
Duplex Reception Setting Disabled 7-89
‹
Set Address for Data Forwarding –
7-89
• Direct SMTP Disabled
• Add Hostname or IP Address Too Disabled
• Hostname or IP Address –
‹
Letter Size RX Reduce Print *
4
Disabled 7-90
‹
Receiving Date & Time Print Disabled 7-90
‹
A3 RX Reduce *
4
Disabled 7-90
‹
POP3 Communication Timeout Setting 60 sec. 7-90
‹
Reception Check Interval Setting 5 min. 7-90
‹
I-Fax Output Setting Varies depending on the machine configuration 7-90
X
Allow/Reject Mail or Domain Name Setting All Invalid 7-90
Item Factory default setting Page