Sharp MX-2314N, Operation Manual, Page: 705 / 836

7-37
SYSTEM SETTINGS
Contents
Printer Settings
* On the MX-2314N, the productivity kit is required.
Image Send Settings
Item Factory default setting Page
■
Printer Settings
7-78
●
Default Settings 7-78
X
Prohibit Notice Page Printing Enabled 7-78
X
Prohibit Test Page Printing Disabled 7-78
X
A4/Letter Size Auto Change Varies depending on country and region 7-78
X
Print Density Level
7-78
‹
Colour 3
‹
Black & White 3
X
CMYK Exposure Adjustment 0 7-78
X
Bypass Tray Settings 7-78
‹
Enable Detected Paper Size in Bypass Tray Disabled 7-78
‹
Enable Selected Paper Type in Bypass Tray Enabled 7-78
‹
Exclude Bypass-Tray from Auto Paper Select Disabled 7-78
X
Job Spool Queuing * Enabled 7-78
X
Disabling of USB Memory Direct Print * Disabled 7-78
X
Disabling of Network Folder Direct Print Disabled 7-78
●
Interface Settings 7-79
X
Hexadecimal Dump Mode Disabled 7-79
X
I/O Timeout 60 sec. 7-79
X
Enable USB Port Enabled 7-79
X
USB Port Emulation Switching Auto 7-79
X
Enable Network Port Enabled 7-79
X
Network Port Emulation Switching Auto 7-79
X
Port Switching Method Switch at End of Job 7-79
●
Auto Colour Calibration – 7-80
Item Factory default setting Page
■
Image Send Settings
7-81
●
Operation Settings 7-81
X
Other Settings 7-81
‹
Default Display Settings Scan (fax when fax is installed)
7-81
• Hold settings for a while after scanning has been
completed
Disabled
‹
Address Book Default Selection Tab Switch: ABC, Address Type: All 7-81