Sharp MX-2314N Operation Manual Download Page 47

Page: 47 / 836

1-6

BEFORE USING THE MACHINE

Contents

AUTOMATIC DOCUMENT FEEDER AND DOCUMENT
GLASS

Automatic document feeder

(1)

Paper feed roller

This roller rotates to automatically feed the original.

(2)

Document feeding area cover

Open this cover to remove an original misfeed or clean
the paper feed roller.

(3)

Original guides

These help ensure that the original is scanned correctly.
Adjust the guides to the width of the original.

☞

PLACING THE ORIGINAL

(page 1-38)

(4)

Document feeder tray

Place originals in this tray. 1-sided originals must be
placed face up.

☞

PLACING THE ORIGINAL

(page 1-38)

(5)

Original exit tray

Originals are delivered to this tray after scanning.

(6)

Scanning area

Originals placed in the document feeder tray are scanned
here.

☞

REGULAR MAINTENANCE

(page 1-52)

(7)

Original size detector

This detects the size of an original placed on the
document glass.

☞

PLACING THE ORIGINAL ON THE DOCUMENT
GLASS

(page 1-40)

(8)

Document glass

Use this to scan a book or other thick original that cannot
be fed through the automatic document feeder.

☞

PLACING THE ORIGINAL ON THE DOCUMENT
GLASS

(page 1-40)

(2)

(8)

(3)

(4)

(5)

(6)

(7)

(1)

Summary of Contents for MX-2314N





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2314N

Reviews:

Related manuals for MX-2314N

Brands by name

Popular brands

Sharp MX-2314N, Operation Manual

Search results

Summary of Contents for MX-2314N

Reviews:

Related manuals for MX-2314N

Brands by name

Popular brands