Sharp MX-2314N, Operation Manual, Page: 703 / 836

7-35
SYSTEM SETTINGS
Contents
*1 On the MX-2314N, the productivity kit is required.
*2 When a paper drawer is installed.
*3 When a finisher is installed.
*4 When a punch module is installed.
*5 When a colour-related problem has occurred.
Copy Function Settings
X
Disabling of Tray Settings Disabled 7-71
X
Disabling of Finisher *
3
Disabled 7-71
X
Disabling of Offset Disabled 7-71
X
Disabling of Stapler *
3
Disabled 7-71
X
Disabling of Punch *
4
Disabled 7-71
X
Disabling of Colour Mode *
5
Disabled 7-71
●
Fusing Control Settings 60 - 89 g /m
2
(16 - 23 lbs.) 7-71
Item Factory default setting Page
■
Copy Function Settings
7-72
●
Initial Status Settings
7-72
X
Colour Mode Full Colour
X
Paper Tray Varies depending on the machine
configuration
X
Exposure Type Auto
X
Copy Ratio 100%
X
2-Sided Copy 1-Side to 1-Side
X
Output –
●
Other Settings 7-73
X
Copy Exposure Adjustment
7-73
‹
Colour 5
‹
Black & White 5
X
Rotation Copy Setting Enabled 7-73
X
Add or Change Extra Preset Ratios – 7-73
X
Setting a Maximum Number of Copies 999 7-73
X
Initial Margin Shift Setting
7-73
‹
Side 1 10 mm (1/2")
‹
Side 2 10 mm (1/2")
X
Erase Width Adjustment
7-73
‹
Edge Clearance Width 10 mm (1/2")
‹
Centre Clearance Width 10 mm (1/2")
Item Factory default setting Page