Sharp DV-HR400S Operation Manual Download | Manualshive

Page: 123 / 131

background image

121

GB

On-screen Error Messages

Messages Relating to DVD and HDD

• The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or

the operation is not correct.

CANNOT PLAY THIS DISC.

INCOMPATIBLE DISC.

CANNOT OPERATE.

DISC IS PROTECTED.

COULD NOT REPAIR THE DISC.

COULD NOT FINALISE.

RECORDING PROHIBITED.
CANNOT RECORD.

TITLE (CHAPTER) IS FULL.
CANNOT RECORD ANY MORE.

CANNOT RECORD ON THIS DISC.

NO CASSETTE IN CAMCORDER.
(DV-HR480S/DV-HR450S only)

COULD NOT INITIALISE.

DISC IS FULL.
CANNOT RECORD.

CANNOT RECORD THIS PROGRAM ON
THIS DISC.

CANNOT DETECT CAMCORDER.
(DV-HR480S/DV-HR450S only)

SET THE DATE AND TIME.

HDD IS FULL, STOPPED RECORD-
ING.

REPAIRING THE DISC.

• The disc cannot be played back with

this Recorder.

• If you load a disc which cannot be

played with this Recorder (i.e. a
scratched disc), or if you load a disc
upside down, this message will
appear, and the disc tray will
automatically pop out.

• Occurs if operation is incorrect.

• Occurs if you attempt to record or edit

a disc for which disc protection is set.

• If there is a power failure during DVD

recording, the system automatically
tries to recover data after power is
restored. This error occurs if such
recovery is impossible as the disc is
scratched or dirty.

• Occurs if the disc is scratched or

dirty, etc.

• Occurs if video with a copy guard

signal is input.

• Occurs if a title or chapter marker

exceeds the recordable upper limit.

• Number of titles: HDD 199/DVD 99.

Number of chapters: HDD 999/

DVD 999

• Occurs if you load a disc which cannot

be recorded to with this Recorder, or a
disc which is scratched or dirty.

• Occurs if you attempt operation when a

tape has not been loaded in the digital
camcorder linked via DV connection.

• Occurs if the disc is scratched or

dirty, etc.

• Occurs if there is no empty space in

the disc.

• Occurs if you try to record a “Copy

Once” broadcast onto a disc which is
not compatible with CPRM.

• Occurs if you set to DV input without

connecting a digital camcorder.

• Occurs if multiple digital camcorders

are connected.

• Occurs if timer programming is done

when the Recorder clock has not been
set.

• Occurs when empty space in the

disc runs out.

• Occurs when recording stops

before disc information has been
correctly written onto a DVD, due to
a problem like a power failure.

• Check the disc, and load it correctly.

• Cancel disc protection, or reload a

recordable disc.

• Check the disc, and load it correctly.

• Cannot record.

• Erase unnecessary titles.
• Either erase unnecessary chapters, or

combine chapters.

• Reload an appropriate recording

disc.

• Load a tape into the digital

camcorder.

• Check the disc, and load it correctly.

• Load a disc with empty space.
• Erase unnecessary titles.

• Load a CPRM compatible disc (DVD-

RW Ver. 1.1 or higher) initialised in VR
mode.

• Connect a digital camcorder, and

reset again to DV input.

• Set the clock and perform timer

programming again.

• Wait until DVD disc recovery is

finished.

Error message

Possible Error

Suggested Solution

Continued on Next Page

|||

HR480S-117-127

05.3.23, 10:04 AM

121

«
...
121
122
123
124
125
...
»

Summary of Contents for DV-HR400S




































































































































Reviews:

No comments

Related manuals for DV-HR400S

Voice Yepp VY-H200

Brand: Samsung Pages: 27

Brand: EDIC-mini Pages: 8

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

DVD RECORDER DVDR77 - Firmware Upgrade Readme File

Brand: Philips Pages: 2

Brand: Philips Pages: 42

Brand: Philips Pages: 59

Brand: Philips Pages: 67

Brand: Philips Pages: 73

Brand: Philips Pages: 80

DVD Video Recorder

Brand: Philips Pages: 56

Brand: Philips Pages: 83

Brand: Philips Pages: 104

Brand: Philips Pages: 101

DVD RECORDER DVDR77 - Firmware Upgrade Readme File

Brand: Philips Pages: 122

Brand: Philips Pages: 161

Brand: Voice Magic Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands