Sharp Actius PC-GP20 Operation Manual Download

Page: 69 / 114

4-10

If the dialog box asking you

What do you want Windows to do?

appears, select the

task you want.

Ejecting PC Card

•

Some PC cards may become hot after long use

•

Be sure to follow the instructions below when ejecting a PC card.
Otherwise, the system may not work properly

1. Click

the

Safely Remove Hardware

icon (

) on the taskbar. If you cannot find

the icon, click

to show all kinds of icons.

2. Click

Safely remove xxxxx

. (xxxxx is the name of your PC card); then,

Safe To

Remove Hardware

dialog appears.

Push the PC card eject button so that it pops out from the side of the computer.

Push the eject button and remove the PC card.

Push the PC card eject button all the way inside the cabinet for safekeeping.

Eject Button

Summary of Contents for Actius PC-GP20



















































































































Search results

Summary of Contents for Actius PC-GP20

Reviews:

Related manuals for Actius PC-GP20

Brands by name

Popular brands

Sharp Actius PC-GP20, Operation Manual

Search results

Summary of Contents for Actius PC-GP20

Reviews:

Related manuals for Actius PC-GP20

Brands by name

Popular brands