Sharp Actius PC-GP20, Operation Manual

Page: 100 / 114

T-3
T
rou
bleshoo
ting
Question: Why do I get the message Press ‘H’ to retry Hard Disk, any other
key for floppy ?
•
If you cancel the re-installation on the way, you will see the message above.
Restart re-installation form the beginning of
Re-installation Instructions
procedures of the provided Supplement and format the entire hard disk (both C:
and D: drives) this time.
Trouble with Display
See also the
Display section of Chapter 2 and 4.
Question: Why is the screen blank?
•
Press any key to see if any power management feature has turned off the screen
to save power.
•
See the power indicator to check whether the computer is turned on.
•
If you are using a battery pack, make sure it is correctly installed and has a charge
remaining.
•
Make sure the LCD screen is selected as the display by pressing Fn+F5 .
•
Check whether the display is on by pressing Fn+F11 .
•
If you still have the problem after trying the above, follow the steps in Why
doesn't the keyboard or the glide pad function?
Question: Why does the external monitor display nothing or the image on
it distorted?
•
Confirm the monitor is turned on.
•
Confirm the monitor is connected correctly.
•
If the television set is connected to the computer, disconnect it.
•
Make sure the external monitor is selected as the display by pressing Fn+F5 .
•
If you use Fn + F5 to change the display, the image may be distorted. Press Fn + F5
again to return the previous display and use Display Properties dialog box to
change it again.
•
Make sure the value of the Screen resolution in the Settings tab of the Display
Properties is as same as that of the external monitor resolution or lower.
•
Make sure the external monitor is not near any electric devices having strong
magnetic fields such as a TV set or radio.
•
Do not share an outlet with a TV set or radio.