Sharp Actius PC-GP20, Operation Manual

Page: 58 / 114

3-9
3
Supporting System Hibernate
If your battery becomes completely discharged during System standby ,
you will lose unsaved data and will need to reboot your computer.
Therefore, if you are planning to leave your computer powered by battery
for long periods of time, we recommend
System hibernate .
Confirm that
System hibernate is supported with the following steps.
1. In the Power Options Properties dialog box, select Hibernate tab.
2. Confirm Enable hibernation is checked.
3. Click OK .
4. Close the Control Panel window.
Set Timer to Enter System Standby/Hibernate Automatically
Your computer will enter System standby/hibernate automatically when the specified
time has passed without any operation. To set the time:
1. In
the
Power Options Properties
dialog box, select
Power Schemes
tab.
2. Set the time after which the computer will enter System standby/hibernate in
System standby or System hibernates .
3. Click OK.
4. Close the Control Panel window.
Entering System Standby/Hibernate
Your computer enters System standby/hibernate in one of the following cases:
•
You select Stand By or Hibernate( which will appear if you press Shift key) in the
Turn off computer dialog box. To open the dialog box, click start – Turn Off
Computer .
•
The specified time in System standby or System hibernates in Power Schemes tab
of Power Options Properties dialog box has passed without any operation. (See the
previous section.)
•
The screen cover is closed .
The above functions if you perform the following:
1. In the Power Options Properties dialog box, select Advanced tab.
2. Select Hibernate or Stand by in When I close the lid of my portable computer .
3. Click OK .