Sharp Actius PC-GP20 Operation Manual Download

Page: 32 / 114

2-9

Removing

Before removing the floppy disk, make sure the floppy disk drive
indicator is not lit.

Press the eject button firmly. The disk pops out slightly. Remove it and store it
properly.

Formatting a Floppy Disk

Make sure the floppy disk is not write-protected, and insert it into the floppy disk
drive.

2. Click

start - My Computer

3. Right-click

3 ½ Floppy (A:)

icon; then, click

Format….

from the pop-up menu.

Select the appropriate formatting options.

5. Click

Start

to start formatting.

•

When you format a floppy disk, all data previously stored on the disk is
lost.

•

You cannot format a double-density (2DD) 720KB floppy disk.

Floppy Disk
Drive Indicator

Eject Button

Summary of Contents for Actius PC-GP20



















































































































Search results

Summary of Contents for Actius PC-GP20

Reviews:

Related manuals for Actius PC-GP20

Brands by name

Popular brands

Sharp Actius PC-GP20, Operation Manual

Search results

Summary of Contents for Actius PC-GP20

Reviews:

Related manuals for Actius PC-GP20

Brands by name

Popular brands