Sharp Actius PC-GP20 Operation Manual Download

Page: 103 / 114

rou
bleshoo

ting

T-6

•

If the computer is turned off, insert a fine rod into the drive tray ejection hole.

Question: Why can’t I read data from a disk or play files?

•

Confirm the disk is inserted correctly.

•

Confirm the drive and file names are correct.

•

Confirm the disk is not stained or scratched.

•

Confirm the disk or files are supported.

Question: Why doesn’t the DVD movie play smoothly?

•

Ensure to use AC power.

•

Set back the screen resolution, color quality, and screen refresh rate to the default
value of 1024x768, 16bit, and 60Hertz.

Question: Why isn’t the optical drive recognized?

•

If the computer is turned on with some kind of DVD disks inserted in the drive,
the drive may not be recognized. In this case, turn off the computer and open the
disk tray by the way on

Question: Why does not the drive open?

on the previous

page. Remove the disk from the drive; then turn on the computer again.

Trouble with Communication

Question: Why can't I communicate through the built-in modem?

•

Confirm the telephone line is properly connected to the modem jack.

•

Confirm the dial setting (pulse or tone) of Windows XP and/or communication
software are matched with the telephone line.

Summary of Contents for Actius PC-GP20



















































































































Search results

Summary of Contents for Actius PC-GP20

Reviews:

Related manuals for Actius PC-GP20

Brands by name

Popular brands

Sharp Actius PC-GP20, Operation Manual

Search results

Summary of Contents for Actius PC-GP20

Reviews:

Related manuals for Actius PC-GP20

Brands by name

Popular brands