GB
SGM Technology for lighting
Palco Series
- 43 -
User’s Manual 1.03
I
NSTALLING THE NEW FRONT LENS PANEL
1
Carefully position the new set of lenses, paying particular attention to the alignment of the LEDs in
relation to the lenses.
ATTENTION !
before positioning the new set of lenses, carefully clean the LEDs with a soft dry cloth.
CAREFULLY AVOID TOUCHING THE LEDs – should this occur, clean them with a dry cloth,
under no circumstances using solvents, products for removing grease, or abrasive objects.
Once the new set of lenses is positioned, fix it to the matrix with the appropriate screws, without
tightening them individually, but following an orderly sequence, progressively tightening them in one
after another.
2
Replace the front glass, after having cleaned it with a soft dry cloth.
3
Close the 2 (top and bottom) shells of the head, ensuring that the front glass is evenly closed
between them.
4
Fix the two shells with the appropriate rear screws.
1
2
3
4
4
3
