SGM Technology for Lighting
GB
User’s Manual 1.03
- 40 -
Palco Series
6
M
AINTENANCE
O
RDINARY MAINTENANCE
Palco does not require much maintenance work, so it must be remembered:
To avoid operating the unit in unsuitable conditions and clean it externally, particularly in permanent
outdoor installations, where objects and material can deposit on it through time. (e.g. leaves and/or
rubbish of various kinds). The Palco head’s rear radiator must be used in the best possible conditions
in order to dispel heat and ensure the unit’s good operation.
Also periodically clean the front glass, particularly if the unit is exposed to the weather.
Should the fixture remain unused for a lengthy period, the clock data may be lost. In this case, the
internal clock must be reset.
S
PECIAL MAINTENANCE
Special maintenance work is required in the following cases:
Breakage of one or more LEDs
External damage to the shell caused by violent impacts
Breakage of the front glass or any other part that compromises the unit’s protection rating
Breakdowns in the fixture’s on-board electronics
ATTENTION:
Do not attempt to repair the fixture. Only authorized staff can work on solving the type of
problems mentioned above.
Contact the nearest SGM assistance centre in the event of special maintenance work
being required
