SGM Technology for Lighting
GB
User’s Manual 1.03
- 26 -
Palco Series
B
OOST
The Boost menu allows to choose 2 different operating modes for the LEDs that make up the Palco.
When enabled, Boost allows an overall increase of 30% in the power flow emitted.
1.
Use the UP/DOWN keys to find the “BOOST=OFF” menu
2.
Press “Enter” and the displayed text will immediately begin to flash
3.
Use the UP/DOWN keys to choose ON or OFF status
4.
Press “Enter” to exit the BOOST menu
ATTENTION !!
Enabling BOOST means halving the overall lifespan of the LEDs by approximately.
100,000 to 50,000.
E
LAPSED TIME METER
This menu gives access to the display of running time of the single channels (Red, Green and Blue).
It’s also possible to reset the elapsed time meter when the LED matrix is replaced. The “L_h” menu gives
access to the display of the fixture’s total operating time and can’t be reset
1.
Use the UP/DOWN keys to find the“R_h” menu to display the operating
time of all the Red LEDs
Resetting the Elapsed Time Meter:
1.
hold the ENTER key pressed down for approx. 6’, until R_h flashes
2.
Use the UP/DOWN keys to find set the elapsed time meter at zero
3.
Press “ENTER” to confirm
Use the same procedure for “G_h” (Green) and “B_h” (Blue).
I
NPUT SIGNAL
This function allows to choose which type of input signal is to be used: DMX 512 or RS-232.
1.
Use the UP/DOWN keys to find the “Sign=DMX” menu
2.
Press “Enter” to confirm the choice. The text on the display will begin to
flash.
3.
Use the UP/DOWN keys to select the type of signal to be used.
4.
Press “Enter” to confirm the choice.
SIGN=DMX
R_h=0
R_h=278
BOOST=ON
