GB
SGM Technology for lighting
Palco Series
- 31 -
User’s Manual 1.03
E
NABLING
–
D
ISABLING THE
S
CHEDULER
The Scheduler allows to organize and run the fully automatic playback of a series of Events on a weekly
basis, including the preset programs on the MASTER fixture. The Scheduler is enabled as follows:
1.
Use the UP/DOWN keys to find the “SCHEDL” menu
2.
Press “Enter” and the displayed text will immediately begin to flash
3.
Use the UP/DOWN keys to choose ON or OFF status
4.
Press “Enter” to exit the SCHEDL menu and confirm
I
NTERNAL PROGRAM PLAYBACK
Each fixture can be programmed with 5 Programs of 10 scenes each. The programs are enabled using the
PRGRUN menu
1.
Use the UP/DOWN keys to find the “PRGRUN” menu
2.
Press “Enter” and the displayed text will immediately begin to flash
3.
Use the UP/DOWN keys to choose the required programs from 1 to 5,
or OFF to stop the playback of a current program.
4.
Press “Enter” to exit the PRGRUN menu and confirm.
P
ROGRAMMER
The Programmer menu allows to carry out Palco’s on-board programming for any stand-alone operation
without external DMX control. The “Programmer” menu also allows to program a maximum of 29 SLAVE
fixtures connected to the MASTER fixture with the on-board programming.
The fundamental stages of the Palco’s programming are as follows:
1. Entering the “PROGRAMMER” menu
2. Choosing the Program number
3. Choosing the scene number
4. Choosing the number of Slaves (if any) involved in the scene
5. Setting scene parameters
6. Choosing the scene times
7. Choosing the fade times
8. Optional scene disabling and enabling
The “Stand-Alone Programming” chapter describes all the operations necessary.
PRGRUN=3
SCHEDL=ON
