SGM Technology for Lighting
GB
User’s Manual 1.03
- 8 -
Palco Series
1.2
Palco functions
U
SITT
DMX
512
All the functions of Palco 3 and Palco 5 can be controlled via Usitt DMX 512 Standard serial digital signal,
or RS 232 serial signal; Palco 5 has an integrated DMX wireless interface. Palco generates a proprietary
data transmission protocol when Master-Slave self-controlled systems are created by on-board
programming.
Palco requires six channels to control all its parameters. All the parameters are controlled and can be
programmed by an integrated processor, MOTOROLA DSP 56F 803 for Palco 3, and DSP 56F805 for
Palco 5.
C
OOLING
Palco 3 does not use any type of forced ventilation as cooling system, thus improving silent running and
preventing the accumulation of dust or particles inside the projector. The radiator, installed on the back
panel of the LED lighting sector, ensures the correct cooling by convection.
Palco 5 uses a forced ventilation system regulated by a software algorithm, which ensures a high degree
of noiselessness.
An integrated temperature self-regulating system ensures continuous operation even in critical thermal
conditions.
C
OLOUR
P
ALCO
RGB
e
F
ULL
C
OLOR
:
Three groups of Red, Green and Blue LEDs make up the matrix that generates Palco’s light beam. Their
layout in the matrix ensures that the emitted light can be controlled as far as Colour, Intensity and
Temperature are concerned. Palco’s colour generation system is therefore based on the concept of
additive colour mixing, where the sum of the various intensities of Red, Green and Blue, (RGB) enables to
create any other colour with the required tone or saturation.
P
ALCO
W
HITE
:
Thanks to two different types of LEDs (White - Amber) forming the lighting sector, it is possible to
accurately recreate the fluctuation and nuances of natural daylight.
The temperature of the white can be regulated without any light efficiency loss in a range from 2000°K to
6700°K approximately.
LED
S
The power of the LEDs making up the light source depend on whether the fixture is a Palco 3 or Palco 5
P
ALCO
5
has a light source formed by 4,5W and 3W K2 LEDs and generates a maximum luminosity of
4500 Lumens.
P
ALCO
3
has a light source formed by 3W and 1W LUXEON LEDs and reaches a luminosity of
2800 Lumens.
P
ALCO
5
W
HITE
has a light source formed by 3W K2 LEDs and 4,5W P4 LEDs and generates a maximum
luminosity of 4800 Lumens.
P
ALCO
3
W
HITE
has a light source formed by 3W LUXEON LEDs and 4W P4 LEDs and reaches a
luminosity of 3800 Lumens.
P
ALCO
5
F
ULL
C
OLOR
has a light source formed by 3W and 1,5W RABEL LEDs and reaches a luminosity
of 5500 Lumens.
