SGM Technology for Lighting
GB
User’s Manual 1.03
- 34 -
Palco Series
S
TEP
2
-
CHOOSING
THE
SCENE
NUMBER
1.
Use the UP key to pass to the “SCENE=1” menu
2.
If it is necessary to create a program other than number 1, press
“Enter” again and “SCENE=” will begin to flash
3.
Use the UP/DOWN keys to choose the required scene number from 1 to
5, then Press “Enter” to exit the SCENE menu and confirm..
S
TEP
3
-
CHOOSING
THE
FIXTURE
NUMBER
1.
Use the UP key to pass to the “FIXT=ALL” menu
2.
Press “Enter” and “FIXT=” will begin to flash
Use the UP/DOWN keys to choose:
- ”ALL” if the scene to be created involves all fixtures ( SLAVES).
- ”MSTR” if the scene to be created involves just the Master fixture.
- ”ODD” if the scene to be created involves the odd-numbered fixtures.
- ”EVEN” if the scene to be created involves the even-numbered fixtures.
- “SLV1” - “SLV29” if the scene to be created must have each slave fixture
with its own channel status, chosen individually
3.
Press “Enter” to exit the FIXTURE menu and confirm.
S
TEP
4
-
SHUTTER
1.
Use the UP key to pass to the “SHUTT=100%” menu
2.
Press “Enter” and “SHUTT=” will begin to flash
3.
Use the UP/DOWN keys to choose the required value of the shutter
channel for the current scene.
4.
Press “Enter” to exit the SHUTTER menu and confirm.
S
TEP
5
-
DIMMER
1.
Use the UP key to pass to the “DIMMR=100%” menu
2.
Press “Enter” and “DIMMR=” will begin to flash
3.
Use the UP/DOWN keys to choose the required value of the dimmer
channel for the current scene.
4.
Press “Enter” to exit the DIMMER menu and confirm.
S
TEP
6
–
RED
/
W
HITE
1
1.
Use the UP key to pass to the “RED=0 %” menu
2.
Press “Enter” and “RED=” will begin to flash
3.
Use the UP/DOWN keys to choose the required value of the COLOUR-
Red channel for the current scene.
4.
Press “Enter” to exit the RED menu and confirm.
RED=50 %
DIMMR=100%
SHUTT=100%
FIXT=SLV12
FIXT=MASTR
FIXT=EVEN
FIXT=ODD
FIXT=ALL
SCENE=1
WHIT1=50 %
