TECHNICAL MANUAL
[Range]
1≤
n ≤ 255
0≤
k ≤ 32
[Description]
Set is horizontal tab positions.
”
n
”
specifies the column number for setting a horizontal tab position
from the beginning of the line.
”
k
”
indicates the total number of horizontal tab positions to be set.
[Notes]
The horizontal tab position is stored as a value of [character width x
n]
measured from the beginning of the line.
The character width includes the right-side character spacing, and
double-width characters are set with twice the width of normal characters.
This command cancels the previous horizontal tab settings.
When setting
n = 8, the print position is moved to column 9 by sending
“
HT
”
.
Up to 32 tab positions (
k=32) can be set. Data exceeding 32-tab
positions s is processed as normal data.
Transmit [
NUL code 0 at the end.
n]k in ascending order and place a
When [n]k is less than or equal to the preceding value [
n]k-1, tab setting
is finished and the following data is processed as normal data,
”
ESC D NUL
”
cancels all horizontal tab positions.
When [n]k exceeds the number of characters printable on one line, the
tab position set is equal to the maximum printable column plus 1.
The previously specified horizontal tab positions do not change. even if
the character width changes.
[Default]
The default tab positions are at intervals of 8 characters (columns 9, 17,
25, ...) for the font A (12 X 24).
[Reference]
HT
ESC E
n
[Name]
Turn emphasized mode on/off
[Format]
ASCII
ESC
E
n
Hex
1B
45
n
Decimal 27
69
n
[Range]
0≤
n ≤ 255(Only the LSB of n is enabled.)
[Description]
Turns emphasized mode on or off.
Only the lowest bit of
n is valid.
When
haracters are selected.
n = <＊＊＊＊＊＊＊1>B, the emphasized c
When
n = <＊＊＊＊＊＊＊0>B, the emphasized characters are canceled.
TITLE : WTP-100
Page36
