TECHNICAL MANUAL
Printable area
Left margin Printing width
[Notes]
This command is effective only of the beginning of a line.
If this command is input in page made, the printer performs only internal
flag operations.
This command does not affect printing in page made.
If the setting exceeds the printable area, the maximum value of the
printable area is used.
The horizontal and vertical motion units are specified by GS P.
Changing the horizontal or vertical motion unit does not affect the current
left margin.
The GS P command can change the horizontal (and vertical) motion units.
However, the value cannot be less than the minimum horizontal
movement amount, and it must be in even units of the minimum horizontal
movement amount.
[Default]
nL = 0, nH = 0
[Reference]
GS W, GS P
GS P
x y
[Name]
Set horizontal and vertical motion units
[Format]
ASCII
GS
P
x
y
Hex
1D
50
x
y
Decimal
29
80
x
y
[Range]
0
≤
x
≤
255
0
≤
y
≤
255
[Description] Sets the horizontal and vertical motion units to 1/x inch and 1/y inch,
respectively.
When x and u are set to 0, the default setting of each value is used. (
x =
180,
y = 360)
[Notes]
The horizontal direction is perpendicular to the paper feed direction and
the vertical directionis the paper feed direction.
In standard mode, the following commands use x or y, regardless
character rotation (upside-down or 90
°
clockwise rotation):
TITLE : WTP-100
Page61
