TECHNICAL MANUAL
1.6 Printable Area
1) Paper roll
The printable area of a paper with width of 79.5± 0.5mm(3.13"±0.02") is 72.2 ±
0.2mm(2.84"±0.008")(512dots) and the space on the right and left sides are
approximately 3.7 ± 2mm(0.15"±0.079").
a=79.5±0.5mm(3.13"±0.02")
b=0.141mm±0.05mm(.056"±.002")
c=72.2mm±0.2mm(2.84±.008")
d=3.7±0.2mm(0.15"±0.079")
e=3.7±0.2mm(0.15"±0.079")
[All the numeric values are typical.]
< Figure 1.1 Paper Roll Printable Area >
1.7 Printing and Cutting Positions
< Figure 1.2 Printing and Cutting Positions >
NOTE: Numeric values used here are typical values; the values may vary slightly as
a result of paper slack or variations in the paper. Take the notice into account
when setting the cutting position of the auto-cutter.
1.8 Internal Buffer
1) Receive buffer: 4kbyte
1.9 Electrical Characteristics
1) Supply voltage:
+24 VDC ± 7%
2) Current consumption (at 24V):
Operating: Approx. 1.5A(at ASCII Printing)
Peak:Approx. 10A(at print duty 100%, For 10 seconds or less)
Stand-by: Approx. 0.15A
TITLE : WTP-100
Page5
