TECHNICAL MANUAL
[Name]
Select page mode
[Format]
ASCII
ESC
L
Hex
1B
4C
Decimal 27
76
[Description]
Select from standard mode to page mode.
[Notes]
This command is enabled only when input at the beginning of a line.
This command has no affect in page mode.
After printing by FF is completed or by using ESC S, the printer returns to
standard mode.
This command sets the position where data is buffered to the position
specified by ESC T within the printing area defined by ESC W.
This command is switches the setting for the following commands (in
which the values can be set independently in standard mode and page
mode) to those for page mode.
① Set right-side character spacing: ESC SP
② Select 1/6-inch line spacing: ESC 2
③ Set line spacing: ESC 3
Setting for the following commands are effective only in page mode:
① Turn 90
°
clockwise rotation mode on/off: ESC V
② Select justification: ESC a
③ Turn upside-down printing mode on/off: ESC {
④ Set left margin: GS L
⑤ Set printable area width: GS W
The printer returns to standard mode by using the ESC @.
[Reference]
FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS ＼
ESC M n
[Name]
Select character font
[Format]
ASCII
ESC
M
n
Hex
1B
4D
n
Decimal 27
77
n
[Range]
n= 0, 1 , 48, 49
[Description]
Selects chatacter fonts
n
Function
0, (48)
Character font A(12 X 24 ) Selected
1, (49)
Character font B(9 X 24 ) Selected
TITLE : WTP-100
Page39
